Electric module telephone transmitter for ja65k wireless alarm system electric modules telephone transmitters for ja65k wireless

Dimension 102x65x20mm . Weight 150gr
The JA-65X communicator is for JA-63 and JA-65 control panels and can communicate with a Monitoring Station, send voice messages and SMS and dial pagers and communicate with remote PCs via a PSTN line

A standard analog telephone line (type TNV 1-3) must be connected to the module for these functions

Note: The communicator must be plugged directly to a telephone line socket. All other devices (telephone, facsimile machine, modem etc.) should be connected to the communicator output.

A control panel equipped with the X module can automatically send 2 voice and 5 short text messages (or dial a Pager). The most convenient programming of the dialer is via a connected PC using the Comlink software. Programming can also be performed manually from the keypad

When activated, the dialer will, one by one, call all programmed numbers and play the user recorded message which corresponds to the event. If the dialer makes a successful connection to a programmed number, it will not call that number again. If the number is busy, the dialer will make 3 more attempts to call it.
The dialer may be programmed to communicate with a monitoring station, the data will first be sent to the monitoring station.

You can record two different voice messages (10 sec. Each). Depending on the setting in section 2.4, a particular message will be sent under different situations.