Function generator 0.1hz-2mhz

characteristic

consists of a signal generator and a digital counter (6 digits)
signal: sine, square, triangle, positive and negative pulse, positive and negative ramp, pulse TTL
pulse width and rise time and fall adjustable
function with VCF
function with DC offset
possibility to use the meter for measuring external frequency

specifications

Frequency range: 0.1Hz - 2MHz (in 7 steps)
waveforms: sine, square, triangle, positive and negative pulse, positive and negative ramp
rise time and fall of the square wave: <100ns
sinusoidal waveform:
distortion: 10Hz - 100kHz <1%
frequency response:
0.1Hz - 100kHz: <± 0.5dB
100kHz - 2MHz: <± 1dB
TTL / CMOS
TTL low <0.4V
TTL level:> 3.5V
rise time: <100ns
output:
Impedance: 50 ohm ± 10%
amplitude:> 20Vpp (no load)
Attenuation: 0dB, 30dB
DC offset between 0 and ± 10V continuously adjustable
adjustment range of the symmetry: 90:10 - 10:90
VCF input:
input voltage: between 0V-5V to ± 10%
VCF ratio max.: 1000:1
Input signal: DC - 1kHz
frequency counter:
measuring range: 1Hz - 10MHz
Input impedance:> 1 Mohm / 20pF
Sensitivity: 100mVrms
Max.: 150V (AC + DC) (with mitigation)
Input Attenuation: 20dB
measurement error: <± 1 digit 3x0.00001
Power: 220Vca/110Vca ± 10%, 60Hz ± 2Hz-50
environmental conditions:
temperature: 0 ° C to +40 ° C
Humidity: RH max. 90%
atm.: 86kPa - 104kPa
dimensions: 262 x 85 x 260mm
Weight: 1.8kg