Detector roller shutter contact roller sutters contact detectors detector detection system for roller shutter contacts roller sh

Dimension 101x90x15mm . Weight 120gr
Sensor wired shutter opening.
Was placed inside the roller shutter box, the wired sensor can trigger the alarm system if a person attempts to lift or pull the shutter.
Technical FEATURES: Type: Sensor wire opening shutter Function: Detection of intrusion Dimensions (cm): H. 11 x l. 11 x P.

This sensor is a motion detector shutter suspects.

It must be used in conjunction with an analysis circuit (ref. 456C1) or a JA-81M (ref. JA80M) in wireless

In practice, the output wire of the sensor is connected to the input of a detector wired JA-81M door connected by radio alarm Oasis.

False alarms pouraient be caused by the wind moving the flaps are avoided because the JA-81M detector will not trigger the alarm if at least three pulses are received from the sensor in 5 seconds.

Contact output 100 mA / 60V Range of motion 5-260 cm Dimensions 94 x 102 x 17 mm Standard EN 50131-1 III. external protection temperature range 25 to 50 ° C

Works exclusively in conjunction with the closure module (ref. 456C1) to be added. The 456 performs measurements and informs the module. One module is sufficient for several detectors opening shutter.